| |
These
Adjustable Ballet Barre Brackets are very sturdy and weigh 2
1/2 lb. each. (Double adjustable weigh 3 1/2 lb.) They have
a bright chrome finish. They come with #12 x 2" flat head
screws. Wall channel allows approximately 14" of adjustment.
|
SPACING
FOR BRACKETS |
| 4'
Barre |
2
brackets spaced 32" apart (8" overhang) |
| 6'
Barre |
2
brackets spaced 48" apart (12" overhang) |
| 8'
Barre |
2
brackets spaced 64" apart (16" overhang) |
| 10'
Barre |
2
brackets spaced 80" apart (20" overhang) |
| 14'
Barre |
3
brackets, 1 centered with 64" space on each side
(20" overhang) |
| 16'
Barre: |
3
brackets, 1 centered with 80" space on each side
(16" overhang) |
|
| |
| There
is a 80" maximum span between brackets on 1 3/4" diameter barres. |
| Minimum overhang is 4". Maximum overhang is 20". |
| No more than three adjustable brackets per barre length. |
| It is harder to adjust barres that have more than three brackets. |
| |
SUGGESTED
HEIGHTS FOR ADJUSTABLE BRACKETS |
| Bottom of channel at 29" from the floor. |
| Barre height adjustable from 30" - 44" (approx.) |
| Distance from wall to barre: |
INSIDE = 7 1/2" (approx.) |
| |
OUTSIDE = 9" (approx.)
|
All dimensions are approximate and may change without notice.
|
ALVA's
warp tolerance for wood is 3/16" per 4' section. |
|
|
All wood barres
are shipped in individual cardboard tubes and are hand-sanded
ready to use or coated as desired.
Poplar is available in 1 7/8"
diameter. Maple, Oak and other woods are also available in
1 3/4" diameter.
If you require
additional information, please phone or email.
|
